• Material Properties
  • UPVC Pipe Dimensions
  • Pipes For Water Supply
  • Pipes for Soil, Waste, & Vent
  • Pipe for Underground Gravity Drainage & Sewage
  • Electrical & Telecommunication Cable Conduit
  • Electrical & Telecommunication Underground Ducts
  • UPVC Pipe to British Standards for Potable Water
  • Fabricated Drawn Radius Bends
  • Fabricated Couplings
  • Rigid PVC Pipe Dimensions Based on ASTM D1785 & D2665
  • Effect of Elevated Temperature on Rigid PVC Pipe
  • Rigid PVC Conduit
  • Rigid PVC Fabricated Elbows to NEMA TC 3
  • Rigid PVC Fabricated Bends to NEMA TC 9
  • Handling and Storage
    •
  • Introduction
  • FlowGuard™ - The Right Product
  • Material Properties
  • Chemical Properties
  • Hot & Cold Water Systems - Dimensions
  • Effect of Elevated Temperature
  • Advantages of CPVC Pipe
    •
  • Introduction
  • Material Designation
  • Polyethylene Material Properties
  • HDPE Pressure Pipes for Water Supply - Dimensions
  • HDPE Non Pressure Pipes - Dimensions
  • HDPE Sub-Duct with Pre-Installed Pull Rope Inside
  • Sub-Duct & Miniduct - Dimensions
  • Advantages of Polyethylene Pipes
    •
    •  
    Visited By : 1228502 People
     
    UPVC PIPES » Rigid PVC Pipe Dimensions Based on ASTM D1785 & D2665
     


    Cold Water Supply,
    Drain, Waste & Vant


    Rigid PVC Pipes Dimensions Based on ASTM D1785 and D2665
     

     


    Table 1.13
     
    Nominal Size (Inch)
     Outside Diameter (mm)
    Schedule 40
    Schedule 80
    Minimum
    Wall Thickness
    Nominal
    Weight
    Working
    Pressure
    Minimum
    Wall Thickness
    Nominal
    Weight
    Working
    Pressure
    Inch
    mm
    Kg / m
    psi
    Inch
    mm
    Kg / m
    psi
    ½
    21.34
    0.109
    2.77
    0.248
    600
    0.147
    3.73
    0.309
    850
    ¾
    26.67
    0.113
    2.87
    0.329
    480
    0.154
    3.91
    0.418
    690
    1
    33.40
    0.133
    3.38
    0.483
    450
    0.179
    4.55
    0.614
    630
    1¼
    42.16
    0.140
    3.56
    0.652
    370
    0.191
    4.85
    0.850
    520
    1½
    48.26
    0.145
    3.68
    0.779
    330
    0.200
    5.08
    1.03
    470
    2
    60.32
    0.154
    3.91
    1.04
    280
    0.218
    5.54
    1.43
    400
    2½
    73.02
    0.203
    5.16
    1.65
    300
    0.276
    7.01
    2.18
    420
    3
    88.90
    0.216
    5.49
    2.16
    260
    0.300
    7.62
    2.91
    370
    4
    114.30
    0.237
    6.02
    3.07
    220
    0.337
    8.56
    4.26
    320
    6
    168.28
    0.280
    7.11
    5.41
    180
    0.432
    10.97
    8.13
    td>
    280
    8
    219.08
    0.322
    8.18
    8.15
    160
    0.500
    12.7
    12.4
    250
    10
    273.05
    0.365
    9.27
    11.5
    140
     0.593
     15.06
    18.3 
     230
     
    NOTE:
    		 1.
            		 Working pressure indicated in psi is maximum value and is based on water temperature of 23º C. For use at higher temperatures please refer to Table.15.      
      2

         		 Threading of only Schedule 80 pipe is recommended. For threaded pipe working pressure consult our Technical Sales Department
    Schedule 80 Pipes is supplied in Gray Color.
      3
         		 ASTM D2665 specifies PVC plastic Drain, Waste and Vent (DWV) pipes.
    Schedule 40 and DWV Pipe is supplied in White Color.
     

     
     
    © Copyright 2012 - 2014 SAPPCO DAMMAM FACTORY. All rights reserved. Designed By : SAUDI SOFTECH
    For detail view of website. You must required internet explorer 8/10 with adobe flash player 10.3 Download IE 10 | Download Flash Player